Xbox 360 console, games

This will show you how to fix the RROD/3 red lights and most E74 errors. For a similar text tutorial look at www.llamma.com Parts I Used: 8 count of M5 nylon and steel washers 1mm thick. 4 count M5 10mm bolts. I got them from www.mcmaster.com and the part numbers are 91460A224 – Bolts 95610A160 – Nylon Washers 95610A160 – Steel Washers

this is a friends console that i dared to break. i told him i could do and with the error that would be received on the xbox would allow it to be covered by warranty. he is now playing on a new working console… guess i won the bet =P

fixing open tray error very simple tap when disc drive starts very quicly and if doesnt work open and close try again

This video shows you a possible solution I found if reflowing with hot air doesnt work, to the E74 error message. Note do not atempt self repairs if u still have a warranty, if u do void ur waranty make sure u fully understand wat than means. Do not atempt relf repairs if u cant even get the case open by urself n know that ul nd thermal paste ahead if time. The problem is either the scaler chip or the grahics chip called ANA or the GPU. From over use the solder inside the chip became loose, my solution the same penny trick used to hold the memory in place. I simpy wraped 11 pennys, which mite be to much 10 should do but test around, in electrical tape and placed them on top of the chip the result when i place the cooling duct bak and the dvd drive back they will push the penys down and hold the loose scaler chip in place. I sugest u do this after heating the ANA with a hairdryer only for a short time no more than a minute just to soften it but not to much(this is reflowing without the correct tools but can work, dont use a hot air gun as its to hot for reflowing ur not removing it!). Do some testing with ur fingers like i did n see if it boots up. I found after a couple of days this actualy fixed it for good but cant say it will be the same for every one, meaning the penys hav 2 stay in, so secure them. The initial fault is bad solder(see other sites for indepth explanation) and it needs to be reflowed with heat for a more permanent solution same goes for the gpu as it …

Ring of Death xbox 360